How To: Easily Change Boot Animations on Your Samsung Galaxy S5
Most Android devices allow you to simply replace a ZIP file in your /system/media folder if you want to change your boot animation. Unfortunately, though, this isn't the case for the Galaxy S5, as it's been buried deep in Samsung's TouchWiz skin.Previously, the process of changing the boot animation on a Galaxy S5 involved finding a specialized file that would apply the new animation from within custom recovery. As you can imagine, the fact that this file needed to be tailor-made for the Galaxy S5 meant that the selection of boot animations for this device was limited.Luckily, though, thanks to a single flashable ZIP file created by developer anbech, traditional Android boot animation files can be applied to a Galaxy S5. This makes the process a lot easier, and even opens up a much larger selection of boot animations. Please enable JavaScript to watch this video.
RequirementsRooted Galaxy S5 running Android version 4.4.2 or lower Custom Recovery Installed (Safestrap for AT&T and Verizon or PhilZ Touch for Sprint, T-Mobile, and International)
Step 1: Download the Custom Boot Animation Enabler FileIn order to enable standard bootanimation.zip compatibility on your Galaxy S5, you'll just need to flash a file in custom recovery. So first, point your GS5's web browser to this link to download the Bootanimation.zip Enabler file. In case you experience any trouble with this mod, it would also be a good idea to download the revert ZIP from this link. Should you need it, the process of flashing the revert ZIP to undo this mod would be the same as depicted in Step 2 below.
Step 2: Flash the Custom Boot Animation Enabler File in RecoveryWith the file downloaded, go ahead and boot your phone into recovery mode. For the AT&T and Verizon variants of the Galaxy S5, this means rebooting your phone, then pressing the Recovery button that appears after the Samsung Galaxy S5 Powered by Android logo. For all other variants, simply power your phone off, then press and hold the Home, Volume Up and Power buttons simultaneously. Before flashing anything in custom recovery, it's always a good idea to make a NANDroid backup. If anything goes wrong, or if you end up not liking the mod, the easiest way to get things back to normal would be to restore that backup.Next, head to the Install entry from your recovery's main menu, then navigate to the internal SD Card folder and find the Download folder inside of it. After that, tap the CWM_CustomBootanimation_44_Enable.zip file, then swipe the slider at the bottom to install it (for PhilZ Touch users, simply tap Yes, Install). When the process is finished, go ahead and reboot your phone.
Step 3: Pick a New Boot AnimationAndroid themer -PiLoT- has put together a nice list of bootanimation.zip files that are now compatible with your Galaxy S5. From your GS5's web browser, head to this link to view the various files in animated form. Each of the boot animations listed in that post has a download link below it. Find the one that looks best for you, then download the corresponding file.
Step 4: Apply Your New Boot AnimationWith your new boot animation downloaded, all that's left to do is place the file in the right folder, then name it properly. So use any root-enabled file browser to navigate to your device's Download folder. From here, copy the boot animation ZIP file that you just downloaded. With the new boot animation file queued up in your clipboard, head to your device's root directory. From here, navigate to the system folder, then the media folder inside of it. Next, ensure that this folder is mounted as Read/Write so that you can modify its contents, then paste your boot animation file into it. Now, just rename the file to bootanimation.zip, which is case-sensitive. After that, long-press the newly-named bootanimation.zip file and select Permissions. From this menu, make sure that the Owner category is set to Read and Write, while all other categories are set to just Read. With that done, go ahead and reboot your phone to have a look at your new boot animation (samples below). In the future, changing your boot animation again will be as simple as replacing your existing bootanimation.zip file with a new one, and the process will be the same as depicted here in Step 4. Which boot animation did you go with? Let us know in the comments section below, as well as on Facebook and Twitter.
The good news is that this will work on any Samsung device that has root. If your Samsung device is rooted, you will be able to enjoy these boot animations. Before we begin, you will need a rooted Samsung phone! Step 1. Go to the Samsung QMG section at AndroidBootAnimation.com and download the Android boot animation you want to install. Step 2.
Easily Change the Boot Animation on Your Samsung Galaxy S5
We are going to help you to easily change the carrier boot animation on Galaxy S4. You can use either Samsung original boot animation logo or a custom one that you may like. This is a very simple method and it works with all variants of Galaxy S4. Firstly you will need to root your phone.
How To Change Boot Animation On Any Samsung Mobile - YouTube
This means that the majority of custom boot animations don't work for the GS5. But, after flashing a single ZIP, you can use the more common "bootanimation.zip" files on your GS5.
How To Remove Carrier Boot Animation On Galaxy S4 - Dory Labs
Most Android devices allow you to simply replace a ZIP file in your /system/media folder if you want to change your boot animation. Unfortunately, though, this isn't the case for the Galaxy S5, as it's been buried deep in Samsung's TouchWiz skin.
How to Install Android Boot Animations on Samsung Phone using
How to Change Your Boot Animation - Android Basics 101 - XDA Developer TV. The great thing about Android is the vast possibilities when it comes to customization.
How to add a custom boot animation to any Samsung ROM
Those of you with a Samsung device looking to add a custom boot animation, your prayers have finally been answered. Thanks to the work of XDA members anbech and smokin1337, it can finally be
Hi, Many of you curious about changing boot animation in samsung mobile. You know samsung uses qmg like boot animations. So it is complex to create own boot animation than creating zip boot animation.In this tutorial I have replaced the qmg files with zip boot animations. I have tested on my Samsung Galaxy Core Prime.
How to Change Your Boot Animation - XDATV - xda-developers
Easily Change Boot Animations on Your Samsung Galaxy S5
How To Change Boot Animation On Any Samsung Mobile For those of you who want custom Android boot animations on your Samsung devices such as Galaxy S4, S5, S6
Easily Change Boot Animations on Your Samsung Galaxy S5
drippler.com/drip/easily-change-boot-animations-your-samsung-galaxy-s5
Easily Change Boot Animations on Your Samsung Galaxy S5. Most Android devices allow you to simply replace a ZIP file in your /system/media folder if you want to change your boot animation. Unfortunately, though, this isn't the case for the Galaxy S5, as it's been buried deep in Samsung's TouchWiz skin.
How to change your Android Boot Animation - androidfact.com
androidfact.com/how-to-change-your-android-boot-animation/
If you need to revert your boot animation back to the stock Boot Animation, just delete your current bootanimation.zip file, (this is safe to do, because this was the file we downloaded, so it's disposable, as long as you didn't delete the backup of the stock boot animation we had earlier), and rename the stock boot animation file from
[Boot Animation] [TW] [SAMSUNG] Change Boot … | Samsung
0 komentar:
Posting Komentar